Do I Need to Replace or Repair My Electrostatic Air Cleaner?
In most cases, electrostatic air cleaners can be restored to their original airflow (CFM) and collection efficiency for significantly less than the cost of replacing the entire unit. Bee Clean Specialties stocks both OEM and high-quality aftermarket parts for nearly every component of an electrostatic air cleaner.
We service and stock parts for many of the industry’s leading brands, including SmogHog®, MistBuster®, Tri-Mist®, Trion®, Aerocology®, Smokeeter®, Cool Blaster®, as well as many international manufacturers, including Indusa®, AES Eurus®, Büchel®, Bristol®, Elbaron®, and IFT®. Most repairs can be completed without removing the air cleaner from service, saving both removal and installation costs.
When Should an Air Cleaner Be Replaced?
There are generally three situations where replacing an electrostatic air cleaner makes more sense than repairing it.
1. The Unit Has Extensive Damage
If multiple major components have been damaged and the total repair cost exceeds approximately 75% of the cost of a new unit, replacement is usually the better investment. This typically occurs after a machine fire is pulled into the air cleaner or when the cabinet has been severely damaged by a forklift or other impact.
If only components such as the blower, motor, power supply, or electrical controls require replacement, repairing the unit is almost always the more economical option.
2. Your Airflow Requirements Have Increased
Your air cleaner may have been properly sized when it was installed, but production changes can increase the amount of smoke, oil mist, or airborne contaminants that need to be captured.
This often happens when:
- Production rates increase.
- Different coolants or lubricants are introduced.
- New materials generate heavier smoke or mist.
Rather than replacing the existing unit, it is often more cost-effective to install a second electrostatic air cleaner to handle the additional airflow and contaminant load.
3. The Unit Is More Than 40 Years Old
Many electrostatic air cleaners remain in operation for decades. However, once a unit reaches 40 years of age or older, the internal wiring often becomes brittle, creating a potential fire hazard. By this point, many of the major electrical and mechanical components are also nearing the end of their service life.
In these situations, replacing the unit may provide better long-term reliability and lower maintenance costs.
Avoid Increasing Fan Speed to Gain More CFM
It is usually not recommended to increase the fan speed by installing a larger motor or changing pulley sizes in an attempt to move more air.
While this increases the airflow (CFM), it reduces the collection efficiency of the electrostatic air cleaner. As air velocity increases, airborne particles spend less time passing through the collection cells. This reduced dwell time means fewer particles are captured, allowing more smoke and oil mist to pass through the unit.
Simply increasing airflow does not mean you are cleaning more air.
If your process requires additional CFM, the best solution is usually to install a larger air cleaner or add a second unit rather than overdriving the existing system.
Whether you operate SmogHog®, MistBuster®, Tri-Mist®, Trion®, Aerocology®, Smokeeter®, Cool Blaster®, Indusa®, AES Eurus®, Büchel®, Bristol®, Elbaron®, IFT®, or another electrostatic air cleaner, Bee Clean Specialties has the experience, replacement parts, and technical knowledge to help you determine the most cost-effective solution.
Still not sure whether to repair or replace your electrostatic air cleaner? Contact Bee Clean Specialties at 888-451-0844. We’ll inspect your system, explain your options, and help you choose the solution that provides the best long-term value.