How Often Do I Need to Clean My Electrostatic Air Cleaner?

How Often Do I Need to Clean My Electrostatic Air Cleaner (1)

One of the most common questions we hear at Bee Clean Specialties is, “How often should I clean my electrostatic air cleaner?”

After considering the many factors that affect cleaning frequency for SmogHog®, MistBuster®, Tri-Mist®, Trion®, Aerocology®, Smokeeter®, and other electrostatic air cleaners, the answer is…

It depends.

That may not be the answer you were hoping for, but several factors determine how often your electrostatic air cleaner should be cleaned and maintained.

Hours of Operation

This is one of the biggest factors. The more hours your air cleaner operates each day, the faster the collection cells and ionizers will become loaded with contaminants.

Also consider how long your equipment is actually producing smoke or oil mist. Some machines run continuously but only generate contaminants during a small portion of their cycle, allowing longer service intervals.

Pollutant Load

Pollutant load refers to the concentration of contaminants entering the air cleaner.

As a general rule, source capture (ducted) systems experience a much higher contaminant load than ambient (free-air) systems. Because of this, ambient systems typically operate longer between cleanings.

Even among ducted systems, service intervals can vary depending on factors such as:

  • The type of manufacturing process
  • The coolant being used
  • The material being processed
  • The amount of smoke or oil mist being generated

Pollutant Type

Electrostatic air cleaners are commonly used to collect oil smoke from high-speed machining, precision grinding, cold forming, industrial frying, rubber and plastic manufacturing, welding fumes, and water-soluble coolant mist.

Different contaminants affect collection cells differently.

Generally, systems collecting light, low-viscosity oils can operate longer between cleanings, while water-soluble coolants, heavy oils, and sticky contaminants require more frequent maintenance.

Type of Air Cleaner

Not all electrostatic air cleaners are designed the same. Different manufacturers and models have different airflow designs, collection cell sizes, and electrical configurations.

For example, many SmogHog®, MistBuster®, Tri-Mist®, Trion®, and Aerocology® models have different collection capacities depending on the application.

Double-pass electrostatic air cleaners, where the airflow passes through two sets of ionizers and collection cells, generally provide longer service intervals than single-pass systems because they have additional collection capacity.

Air Velocity

Air velocity through the collection cells also affects cleaning frequency.

Most electrostatic air cleaners are designed to operate between 300 and 500 feet per minute (FPM). If the air moves too quickly, particles have less time to become charged and collected, causing the collection cells to load more quickly and reducing overall efficiency.

So, How Do You Determine the Right Cleaning Frequency?

There are several simple ways to determine the ideal maintenance schedule.

Check the After-Filter

Inspect the aluminum mesh after-filter every week. If it begins collecting noticeable smoke or oil mist, it’s a good indication that contaminants are passing through the collection cells and it’s time to schedule cleaning.

Once you’ve established how long it takes before the after-filter begins collecting contaminants, schedule service slightly before that point to maintain peak efficiency.

Trial and Error

Another effective method is to begin with a reasonable maintenance interval—typically every one to six months—and adjust as needed.

If smoke begins blowing through before your scheduled service, shorten the interval. If the collection cells remain relatively clean, you may be able to extend the time between cleanings.

Inspect the Collection Cells

The collection cell captures contaminants beginning at the air inlet side. As the front of the cell becomes loaded, particles begin collecting farther back.

By removing the collection cell and inspecting the plates, you can estimate how much of the cell has been loaded. Once contaminants have built up through approximately 80% of the collection cell, it’s time for cleaning and maintenance.

A Good Starting Point

A properly designed electrostatic air cleaning system typically requires service every one to three months, depending on the application.

If your equipment requires cleaning more frequently than once a month, the system may be undersized or handling a heavier contaminant load than originally designed.

If your system operates significantly longer than three months without requiring cleaning, it may be larger than necessary for the application.

For most facilities, Bee Clean Specialties recommends starting with quarterly service, unless the application is known to generate heavy smoke or oil mist.

Whether you operate SmogHog®, MistBuster®, Tri-Mist®, Trion®, Aerocology®, Smokeeter®, or other electrostatic air cleaners, our experienced technicians can help determine the ideal maintenance schedule for your equipment and production environment.

For more information, watch our video below:

https://www.youtube.com/watch?v=0N-4Yi0ylH0

Thanks for Reading,

The Bee Clean Team

contact@beecleanspecialties.com

847-451-0844

Share: