Why Is My Electrostatic Air Cleaner Snapping?

Why is my electrostatic air cleaner snapping

If your SmogHog®, MistBuster®, Tri-Mist®, Trion®, Aerocology®, Tepco®, Eltron®, or other electrostatic air cleaner is making a snapping or arcing noise, it usually indicates that high voltage is shorting to ground somewhere inside the unit. While an occasional snap can be normal, frequent or continuous arcing is a sign that the unit should be inspected. https://www.youtube.com/watch?v=XT4ETFH5SDI

Bent Collection Plates

One of the most common causes of arcing is bent collection plates. If the grounded and high-voltage plates become too close together, electricity can arc between them. This damage often occurs during cleaning or improper handling of the collection cells.

Broken or Loose Ionizer Wires

A broken or loose ionizer wire is another common cause. The wire may only contact ground intermittently, causing occasional snapping, or it may eventually create a direct short that prevents the unit from operating properly.

Bent Contact Springs

Sometimes the problem is not the collection cell itself but a bent or damaged contact spring inside the cabinet. These springs supply power to the collection cells, and if they are bent or making poor contact, arcing can occur even though the cell appears to be in good condition.

Damaged Insulators or Carbon Tracking

Cracked ionizer insulators or carbon tracking can also create a path for high voltage to ground. These problems are often difficult to spot and usually require a careful inspection by an experienced technician.

Dirty Collection Cells

One of the most common causes of snapping is dirty collection cells. As grease, oil, smoke, and contaminants build up on the plates, they create a conductive path that allows high voltage to arc. Regular cleaning and preventive maintenance help keep your electrostatic air cleaner operating efficiently while reducing nuisance arcing.

Need Help Troubleshooting Your Air Cleaner?

Bee Clean Specialties has over 48 years of experience servicing industrial electrostatic air cleaners and mist collectors. We service equipment from SmogHog®, MistBuster®, Tri-Mist®, Trion®, Aerocology®, Tepco®, Eltron®, and many other manufacturers.

Our fully stocked service trucks carry common replacement parts to minimize downtime and complete many repairs on-site. Whether you need troubleshooting, routine maintenance, or replacement parts, Bee Clean Specialties can help keep your equipment operating at peak performance.

Need help resolving an arcing or snapping electrostatic air cleaner? Contact Bee Clean Specialties today at (888) 451-0844.

Share: